In building interior walls, one of the most common materials around is drywall because it is relatively cheap and easy to install. Yet one critical part of drywall installation that seems to be overlooked is how many screws are needed per sheet when using metal studs. This article will cover everything you need to know about how to perform a proper drywall installation on metal studs — how it works, what doesn’t work, and what industry standards have established as best practices.
Why Use Metal Studs?
Metal studs became popular almost over few decades in both residential and commercial construction, for number of reasons. Not only are they lightweight, fire resistant and termite-immune. Additionally, metal studs provide a stronger overall base for structural integrity versus standard wood frame methods. The Gypsum Association notes that metal studs not only generally produce better drywall jobs, they also provide your walls with more overall strength and stiffness than framing them with wood.
How Many Screws to Use Per Sheet of Drywall A Detailed Breakdown
How many screws per sheet of drywall are needed differs by the size of your drywall sheets as well as tolerance in local building codes and type of metal studs. For example, when fastening 4′ x 8′ sheet drywall on metal studs you should use about 32 screws average This translates to:
Top Edge: Screws every 12 inches (2 screws)
– Lower Side: 2 screws every 12 inches
– One screw per 16 inches (5 screws) Vertical Edges
– Field Area: 16 screws (1 screw every 16 inches)
This gives us a total of about 25 screws for both the edges and field area and is also enough for all four corners- assuming you’re adding as little weft as you are from step three. Check with your local jurisdiction in case they need to make modifications due to specific building codes.
Why Screw Placement Is Important.
To guarantee a solid, long-lasting drywall installation, screws must be correctly positioned. A Badly Fitted Screws Cause
1. Cracking — Poor placement of screws may eventually lead to the drywall cracking.
2. Bulging : Without enough support the walls may bow as a result having a direct impact on appearance and function.
3. Sound Transmission — improperly placed screws may not effectively deaden sound transmission causing noise concerns.
By following the best practices outlined by the Gypsum Association, a safe screw installation will greatly decrease these risks in result of providing a high quality finish.
Frequently Asked Questions Regarding Drywall and Metal Studs
1. Can I use fewer screws?
In some places it might be tempting to skimp a little and using fewer screws than what is recommended can weaken the integrity of the installation. Remember to always adhere to the recommendations of the manufacturer and to all local building codes.
2. What kind of screws should I use?
The use of self-tapping metal screws is recommended for some metal studs. These screws come with a sharp end for easy screwing into metal without pre-drilling.
3. Do different drywall thicknesses require different screws?
Thicker drywall panels, yes may need more screws to give enough support. Always consult with the manufacturer for thickness-specific requirements.
Case Studies and Expert Analyses
Research by the best in the business has repeatedly shown just how much it pays to follow correct screw placement practices. Homes built with metal studs and drywall done right cracked less, sagged less, a case study by the National Association of Home Builders concluded that such houses developed 30% fewer cracksdoer settling issues than those framed in wood. Even architects are usually renewed on making these comply to their drawings, for all they are worth as key drivers of the life span/performance.
Conclusion: Ensuring Quality Through Adherence to Standards
For those who are using either hot dipped fasteners (same corrosion protection as stainless) OR all stainless screws then the number of mounting screws per sheet is 7, but a crucial part to mounting drywall on metal studs. There are best practices when it comes to ensuring that your walls will be durable and nice looking, while still being code compliant. If you are a hardcore DIYer or experienced contractor, you will forgive yourself for taking your time to ascertain the right screw placement overall. After all, the safer and long-lasting the building is better the installation it receives.
Spanish (Spain) 
English 
French 
German 
Malay 
Spanish (Mexico) 
Italian 
Swedish